ZTA series gas booster pump

• Gas booster pumps can be divided into two categories for gas sources
  
  Gas booster pumps are generally classified into two categories based on inlet pressure
  
  1、 One is to increase the pressure of nitrogen cylinders, argon cylinders, oxygen cylinders, etc. The inlet pressure is too high, and when the pressure of the steel cylinder drops to half, it cannot meet the customer's needs. Therefore, Fuente ZTA/ZTD can be used
  
  ZTA belongs to Fuente single-stage single head booster pump - also known as single head pump
  
  ZTD belongs to Fuente single machine double head booster pump - also known as double head pump
  
  The Fuente gas booster pump ZTA/ZTD can boost various gases using oil-free compression, with a working pressure of up to 80MPa. If the ultra-high pressure is between 80MPa and 200MPa, please inform Fuente's business here
  
  2、 For low-pressure gases, such as nitrogen generators and hydrogen generators, a Fuente two-stage gas booster pump can be used to increase the pressure of low-pressure gases to a very high level. The ZTT gas booster pump is pressurized to a high pressure through the first stage pump head and then further pressurized to a high pressure through the second stage pump head
  
  Below are the parameters of the Fuente ZTA gas booster pump
  
  ZTA series booster pump picture

The Fuente ZTA series gas booster pump adopts a single gas controlled non-equilibrium gas distribution valve to achieve the reciprocating motion of the pump. All are made of aluminum alloy and stainless steel, and all seals are imported high-quality products. The maximum design driving pressure is 10 bar. To ensure the service life of the pump, it is recommended that the driving pressure be ≤ 8 bar. The drive piston diameter of this series of pumps is 160mm, which is a single acting pump. All single acting pump heads are equipped with exhaust cooling.

The parameters of the ZTA series gas booster pump are as follows

A system can be developed with the ZTA series booster pump as the core, which is more convenient for customers to use (as shown in the figure below)