CO2 small bottle filling equipment

Liquid carbon dioxide small steel cylinder filling equipment, gas cylinder filling system, automatic filling machine

1、 Equipment principle

The automatic filling machine is suitable for filling small bottles such as 0.5L/1L/2L and various gas cylinders

Digital pressure control: High pressure upper limit pressure and low pressure lower limit pressure can be set to achieve the purpose of automatic start below the lower limit pressure and automatic stop above the upper limit pressure, which is commonly known as high stop and bottom start.

2、 Scope of application

Low temperature CO2 pressurized transportation, high-pressure filling of small gas bottles, and recovery and use of liquid carbon dioxide

Carbon dioxide, nitrous oxide, refrigerant (Freon), etc

3、 Main technical parameters:

1. Filling medium: liquid CO2 pressurized output and filling.

2. Filling pressure: 15-20mpa

3. Filling weight: 0.3-1.7KG, (can be set by oneself)

4. Import size: Gas cylinder connector

5. Interface size: Can be equipped with small gas bottle quick connector or customized connector

6. Driver interface: 12MMPU hose quick plug interface

7. Drive requirements: Compressed air 0.6-0.8MPa, 0.7 m ³/min

8. Power supply voltage: 220V

4、 Introduction to Operation Steps

1. Connect the gas source, power source, and carbon dioxide source

2. Connect the inflated bottle

3. Set the filling pressure

4. Press the [Start] button to start filling the device

5. Automatically stop after filling to the set pressure

6. Close the filling valve

7. Remove the gas cylinder and replace it with another empty one

8. Open the filling valve and the equipment will automatically start filling

9. This type of equipment is non-standard equipment, and specific equipment parameters, appearance, and price are subject to technical requirements

The approximate circuit diagram of the equipment is as follows

The characteristics of the automatic filling machine for liquid carbon dioxide small steel cylinder filling equipment and gas cylinder filling system are as follows:

1. The equipment operation is very simple and easy to maintain, with few vulnerable parts.

2. The filling system can set different pressures according to customer requirements, which can meet the needs of most customers.

The core component of the device is a Fuente ZTD28 pneumatic low-temperature booster pump. Stable performance.

4. Tooling can be designed according to the customer's bottle mouth specifications, with high efficiency.