Hydrostatic test bench - dedicated for valve and pipeline pressure detection

The core components of the digital control type valve testing machine ball valve check valve testing equipment are powered by a Fuente gas driven liquid booster pump. The control method is set by Fuente's self-developed digital controller microcontroller to output pressure, holding time, and determine whether the product pressure test is qualified or not

The parameters of the valve testing equipment on the valve testing platform are as follows

Drive air pressure: 3-8 bar

Output pressure: 0-300Mpa (optional)

Display accuracy: 0.01Mpa

Flow rate: 0.2-50L/min

Workstation: 1 workstation

Product judgment qualified: response - green light - buzzer alarm - digital controller display

Product judgment unqualified: Response - Red light - Buzzer alarm - Digital controller display

Pressure holding time: can be set according to customer requirements

Fixture: Can be designed, customer needs to provide test pieces

Test valve (taking ball valve as an example), half open state, fully open state. The entire process is divided into: tightening, exhausting, pressurizing, judging, and unloading.

The temperature can be adjusted from 0 to 100 ℃

Hydraulic test bench

1. Characteristics of valve testing equipment on valve testing bench
   Easy to operate and maintain
   Pneumatic boosting, pressure can be infinitely adjusted
   Digital display control type, high display accuracy, more convenient setting and operation
   Valve tightening fixture adopts cylinder tightening method, with high degree of automationHydraulic testing machine tooling