Customer selection and design requirements for ZTS-ZTA40 nitrogen boosting equipment.

Technical support inquiry / 2026-07-23 15:09:10 氮气增压机氮气增压设备

The customer's requirements for pneumatic nitrogen boosting equipment are as follows. Design is required.

1. The customer's on-site driving gas source is 6-8 bar, and the pressurized medium is a 40 liter nitrogen cylinder.

2. A 2-meter high-pressure nitrogen cylinder pipeline (G5/8- equipment inlet) needs to be reserved

3. Pressure 20-25Mpa, digital display control, can set upper and lower limits of pressure, such as setting the upper limit to 28Mpa and the lower limit to 25Mpa. During this time period, the equipment will stop working.

4. High pressure storage tank 4L, equipped with pressure reducing valve for customers to use for pressure reduction (15-28Mpa)

5. The bottom of the system is equipped with universal wheels for easy movement.

6. The internal wiring of the system is reasonable, and the booster pump is a ZTA40 booster pump with a beautiful and elegant appearance.

7. Before leaving the factory, a video must be taken for confirmation before shipment.

8. The box adopts a closed box. Wooden crate packaging.

9. The valve of the equipment adopts a high-pressure needle valve.

Nitrogen pressurization equipment

氮气增压设备