Mobile phone: 18815239758 (same as WeChat)
Phone: 0576-89881178
Phone: 0576-89825885
Structure of pneumatic booster pump
The main structure of a pneumatic booster pump is divided into a drive cylinder and a booster cylinder. Below, the editor will provide a detailed introduction to the structure of a pneumatic booster pump.
The drive cylinder generally consists of front and rear end caps, directional valve chambers, directional valves, mufflers, pistons, and cylinder barrels. It can be divided into 80, 120, and 160 cylinder diameters according to the flow rate. The larger the cylinder diameter, the greater the flow rate. The wall thickness of the drive cylinder is generally 5mm.
The booster cylinder is also divided into front and rear end caps, pistons, and inlet or outlet ports with one-way valves to prevent backflow. The connection between the end caps is sealed with a sealing ring. The high-pressure cylinder barrel is generally made of 304 stainless steel, and the double-layer cylinder barrel has a cooling effect.
Do you have anything else to know about pneumatic booster pumps? Please visit our official website http://www.tz-fet.com/ .
The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted
Fax: 0576-89888385
Address:4th Floor, Building 2, No. 78 Huibin Road, Xinqian Street, Huangyan District, Taizhou City, Zhejiang Province
Email: vic@tz-fet.com
