Pneumatic air booster pump

After decades of development and exploration, China's industry has become increasingly dependent on compressed air power. Almost all industries cannot do without air compressors. With President Xi Jinping's goal of energy conservation and emission reduction, major air compressor manufacturers have set the pressure of large air compressors at 0.6MPA to achieve less energy conservation and emission reduction. In this situation, some equipment in factories or laboratories may not meet the gas requirements. What should be done? At this point, it is necessary to consider the issue of boosting. Although the pressure of a large air compressor is limited, the flow rate is still so large that there will be a lot of margin. In this case, a pneumatic air booster pump is used. Below, the editor of the pneumatic air booster pump will give you a brief introduction.

High pressure gas booster pumpMicro gas booster pumpFive fold air booster pump system

Pneumatic booster pumps can distinguish flow rates based on boost ratios and cylinder diameters. How to distinguish boost ratios and what are their uses? The boost ratio is calculated based on the original gas source pressure and the boost ratio to obtain the boosted pressure. For example, if ZTV02 has a boost ratio of twice, the original compressed air pressure of 0.5MPA is 5 kilograms, and the high-pressure outlet pressure after entering the ZTV02 booster pump is 1MPA, which doubles the effect by 10 kilograms. Other models can also be selected to boost up to 100 times. The size of the cylinder diameter determines the flow rate of compressed air after it is increased. The large cylinder diameter of domestically produced Feentor booster pumps has reached 160mm, which is currently one of the largest in China. The size of the cylinder diameter determines the amount of gas inhaled at a time, and the larger the amount, the greater the flow rate.

Pneumatic air booster pump is a particularly good choice for local boosting. In the field of explosion prevention, it is the only choice. Using compressed gas as power does not involve electric sparks, and it can be used with confidence in dangerous situations. It can also be used for sterile pressurization in the pharmaceutical or food industries. Its unique design concept ensures that all pressurization cylinders are sealed without any issues of gas leakage, eliminating the need for further cleaning.