Oxygen filling booster pump

Oxygen filling booster pump

Hello everyone, the following introduces the use cases and characteristics of oxygen filling pumps

Main content of oxygen filling booster pump

1、 Product Introduction:

The main function of the oxygen filling booster pump is to extract oxygen, hydrogen, nitrogen and other gases from the gas source bottle and fill them into the gas cylinder to be filled, increasing the pressure to 20MPa-30MPa.

When the oxygen filling booster pump pressurizes oxygen, it can pressurize a 40 liter oxygen cylinder with a pressure of 10MPa to a 2L cylinder with a pressure of 20MPa in just 30-120 seconds, which meets the national standard of 50 seconds.  

2、 Product features:

1. Suitable for filling oxygen and non combustible gases (inert gases can also be filled)

2. High filling efficiency, different oxygen filling boosters (pneumatic type) can be selected according to the oxygen source

3. The product has a rigorous structure, small size, and light weight (weighing approximately 20kg)

4. The product is easy to operate, easy to maintain, and has low usage costs

5. The oxygen filling booster pump has no sparks and can be used in flammable and explosive environments;   

3、 Product parameters:

Model:

ZTA40 (single machine single action) ZTD40 (single machine double action) is suitable for oxygen inlet pressure of 1.5-15mpa

ZTT40 (two-stage booster) is suitable for oxygen inlet pressure below 1.0mpa

Inflation pressure: ≤ 30MPA

Exhaust volume under oxygen cylinder conditions: 40L-154L (per minute), oxygen inlet pressure of 20 bar

Boost ratio: 1 level/2 levels

Compression ratio: 40:1

Piston stroke: 230mm

Piston diameter: Φ 125mm -160mm

Drive pressure range: 3-8 bar

The displacement of the air compressor that needs to provide on-site air pressure is 7.5 kilowatts and a displacement of 1 cubic meter

Noise: 63 decibels

4、 Usage:

This product is used as an oxygen filling device to increase the pressure of oxygen in a gas source bottle to another gas cylinder, so that the oxygen in the cylinder reaches the required pressure value. It is also suitable for extracting and filling gases such as oxygen, nitrogen, carbon dioxide, etc. from the gas source bottle into the gas cylinder to be filled.

5、 Function:

Oxygen filling booster pump is mainly used as a gas booster pump for filling high-pressure gas cylinders of oxygen respirators and compressed oxygen self rescue devices. It is to pressurize and fill oxygen or other non combustible gases from a large gas cylinder into another gas cylinder. It can automatically control the filling pressure. Widely used in places where gases are used, such as firefighting, aviation, petrochemicals, metallurgy, ships, etc

Below is a brief introduction to the principle and structure of an oxygen filled booster pump

Schematic diagram of oxygen booster

Physical picture of oxygen filling booster pump

Construction diagram of oxygen filling booster pump

In addition, the oxygen filling booster can also be made into a set of equipment by adding some valves, fittings, pressure gauges, and high-pressure pipelines to the pump body, which is more convenient for customers to use and operate

Physical picture of oxygen filling and pressurization system

Schematic diagram of oxygen filling and pressurization system circuit

The above is a brief introduction to the oxygen booster filling pump. If you have any questions, please feel free to provide your opinions to the editor. Thank you

Legal statement: The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted