Mobile phone: 18815239758 (same as WeChat)
Phone: 0576-89881178
Phone: 0576-89825885
The "Four Elements" of Gas Boosting Pump Selection Make Boosting Pump Selection So Easy!!
The four major elements for selecting a gas booster pump are: driving pressure, output pressure, output flow rate, and inlet pressure
1、 The driving pressure is the power source that drives the gas booster pump, and the general driving pressure range is 3-8 bar.
2、 Output pressure refers to how much nitrogen output pressure the customer needs to meet the on-site operating conditions. Does pressure require a stable output or is it sufficient to meet the required pressure?
3、 What is the desired output flow rate for the customer after nitrogen pressurization? Generally, we use standard units or Ln/min for conversion.
4、 The inlet pressure determines the selection and flow rate of the pump. The inlet pressure is generally divided into low pressure, medium pressure, or high pressure. For example, the pressure of a nitrogen generator is generally low pressure for secondary boosting, usually using a two-stage pump for boosting or ZTA series for boosting to medium high pressure.
Finally, several commonly used gas booster pump models from Feentor are provided for your reference (as follows)
The output pressure of ZTA02 is 20 bar, and the flow rate is approximately 960 L/min
The output pressure of ZTA05 is 40 bar and the flow rate is 360 L/min
The output pressure of ZTT25 is 200 bar, and the flow rate is approximately 140 L/min
The above gas booster pumps can all be equipped with gas storage tanks to ensure stable pressure output. Of course, they can also be made into a complete control system for more convenient operation.
Fax: 0576-89888385
Address:4th Floor, Building 2, No. 78 Huibin Road, Xinqian Street, Huangyan District, Taizhou City, Zhejiang Province
Email: vic@tz-fet.com
