Compressed Air Boosting System of Compressed Air Boosting Pump

What should I do if the compressed air pressure from the air compressor is not enough? Can compressed air still be pressurized again? This will definitely boost the pressure. It just depends on the on-site situation to choose the corresponding booster pump or compressed air booster system. Below, the editor will take you into the world of compressed air booster pumps, to see what kind of situation and choose what equipment.

Firstly, let me introduce the principle of compressed air booster pump. Compressed air booster pump is divided into drive cylinder, booster cylinder, and reversing valve chamber. There are several commonly used boosting stages on the market, such as 2x, 3x, and 5x. To explain the 2x stage, the boosting cylinder and the driving cylinder are connected by a piston rod. The piston at the driving cylinder end is twice that of the boosting cylinder, and compressed air of 2-8 bar is simultaneously introduced at both ends. Therefore, according to the energy conservation law, when the pressure of the boosting cylinder is twice that of the driving cylinder, the two pistons can reach equilibrium and stop moving. At this point, the original compressed air pressure will double. The same principle applies to 3x and 5x.

After understanding the compressed air booster pump, let's take a look at the compressed air booster system. The booster system is composed of the compressed air booster pump as the core component, with the addition of an air storage tank, safety valve, pressure reducing valve, drainage valve, high-pressure pipeline, high-pressure gauge, two-piece connection, various high-pressure switches, etc. Its main function is to stabilize the compressed air pressure and reduce pulses, store compressed air to prevent the equipment from using too much air in an instant, and adjust the output pressure at any time. When the pressure in the air storage tank is too high, the safety valve reduces the pressure and maintains it within a stable range. The high-pressure pipeline is composed of hard metal pipelines to prevent aging, cooling, fast pressure resistance, and other characteristics. The drainage valve should be opened regularly to discharge excess water in the air storage tank regularly to prevent accelerated corrosion of the tank body. The two connected parts should be lubricated regularly to lubricate the booster pump and extend its service life.

Legal statement: The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted