Mobile phone: 18815239758 (same as WeChat)
Phone: 0576-89881178
Phone: 0576-89825885
Can the Fuente air booster pump be used if the pressure of the air compressor is insufficient
Nowadays, air compressors in factories or laboratories are generally 6-8 bar, which can no longer meet the high pressure requirements of individual equipment. In this situation, buying a high-pressure air compressor is not cost-effective (due to various factors such as the price of the high-pressure air compressor, the laying of high-pressure pipelines, and the power consumption of the high-pressure air compressor). So at this point, the Feentor air booster pump is needed to increase the original pressure to the maximum air pressure requirement of the equipment.
The principle of the Feentor air booster pump is to use the original compressed air as the power source, which drives the large piston of the driving cylinder to drive the small piston of the booster cylinder to compress the original gas for boosting. When choosing a Feentor air booster pump, it is necessary to contact Feentor sales engineers based on your own on-site usage conditions. Because the usage conditions are different and the working conditions are different, some only need to use the air booster pump, while others must use the Feentor air booster system to avoid future troubles.
Fax: 0576-89888385
Address:4th Floor, Building 2, No. 78 Huibin Road, Xinqian Street, Huangyan District, Taizhou City, Zhejiang Province
Email: vic@tz-fet.com
