Mobile phone: 18815239758 (same as WeChat)
Phone: 0576-89881178
Phone: 0576-89825885
The important application of nitrogen pressurization system in physical foaming
Typical applications of high-pressure physical foaming equipment
Instructions for high-pressure physical foaming equipment:
Taizhou Feentor Fuente High Voltage Physical Foaming Technology is an advanced cable manufacturing process that not only ensures excellent signal transmission characteristics of cables, but also reduces the cost of cable production enterprises. Our company provides manual high-pressure gas injection stations and fully automatic high-pressure gas injection stations necessary for stable performance of high-pressure physical foam cable production lines using gas pressurization and control technology.
Taizhou Fuente gas assisted injection molding technology uses high-pressure inert gas injection into molten plastic to form a vacuum section and push the molten material forward, achieving processes such as injection, pressure holding, and cooling. The booster system provided by Taizhou Feentor Company has a flow rate of up to 400NL/min and a working pressure of up to 500b
ar, The pressure regulation error is within ± 2 bar.
nitrogen booster compressor
Water assisted injection molding technology is a new type of molding method for producing hollow or partially hollow injection molded products. The advantages are: thick molded products, very smooth inner surfaces, and short cooling time. The main demand comes from suppliers of hollow products for automobiles. The maximum working pressure of the boosting system provided by our company can reach 400 bar, and the output flow rate can be adjusted from 0-15L/min at 400 pressure. It can control two injection molding machines simultaneously, and both injection molding machines can independently control pressure and flow.
Nitrogen pressurization equipment
Legal statement: The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted
Fax: 0576-89888385
Address:4th Floor, Building 2, No. 78 Huibin Road, Xinqian Street, Huangyan District, Taizhou City, Zhejiang Province
Email: vic@tz-fet.com
