Introduction to Valve Hydraulic Testing Machine

Introduction to Valve Hydraulic Testing Machine

Domestic valve production backbone enterprises have been able to design and manufacture various valves in accordance with international standards such as ISO international standards, DIN German standards, AWWA American standards, etc. Some manufacturers' products have reached the international advanced level. Although the overall level of the national valve industry has greatly improved, the quality is still not stable enough, and phenomena such as running, emitting, dripping, and leaking often occur in domestic valves.

In response to the market demand for valves in China, more and more valve testing equipment has emerged. Below is an introduction to the Feentor Valve Hydraulic Testing Machine

Parameters of valve hydraulic testing machine:

Drive mode: Pneumatic type

Output pressure: 0-640MPa

Output flow rate: 0.1-55L/min (customers can choose different valve hydraulic testing machines according to different pressure ranges)

Control mode: manual type, digital display control type, computer control type

※ Manual type: Adjust the output pressure based on the proportional relationship between the output pressure of the valve hydraulic testing machine and the driving gas source pressure (2-8bar)

※ Digital display control type: output pressure can be set, holding time can be set, and it has qualified display functions such as buzzer;

Computer type: output pressure, can be monitored in real time, can print curve reports, high degree of equipment automation;

Typical applications of valve hydraulic testing machine:

Common static water pressure testing for gate valves, globe valves, plug valves, ball valves, butterfly valves, needle valves, diaphragm valves, etc

Can conduct destructive tests on various valves;

Conduct spot checks on the valves on the pipelines at the customer's site to inspect the sealing between the valves and the pipelines

The execution standard of valve hydraulic testing machine is based on GB/T 1048-2005

The tooling for the valve hydraulic testing machine can be provided by customers or customized non-standard by Feentor manufacturers

The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted