Mobile phone: 18815239758 (same as WeChat)
Phone: 0576-89881178
Phone: 0576-89825885
Operation method and usage precautions of Feentor gas booster pump ZTD40
Let me introduce the operation method and usage precautions of the Feentor gas booster pump ZTD40.
When using the ZTD40 gas booster pump, attention should be paid to the meaning of the pump model. The booster ratio of the pump is 40:1, and the output pressure is a multiple of the driving pressure. The specific output pressure calculation method is: driving pressure * booster ratio+plus inlet pressure equals the output pressure.
2. In addition, when using the pump, it is necessary to pay attention to the strict matching of the connecting pipeline according to the thread size of the pump's drive port, air inlet, and high-pressure outlet. It should not be assumed that there is no problem and can be used casually. The size of the pump's drive port is G1/2, and the size of the air inlet and high-pressure outlet is NPT1/4. When connecting the drive ports, it is recommended to add an oil-water separator (three in one) to filter a small amount of moisture, impurities, etc. in the driving air. The pressure regulating valve can adjust the driving air pressure to adjust the output pressure.
3. In addition, if the filled pipeline or container is large, it can be pre inflated before starting the booster pump, which can greatly save work time, improve work efficiency, and reduce the wear and tear of the gas booster pump.
When installing the ZTD40 gas booster pump, it is generally recommended that customers install it vertically. The advantage is to make the sealing ring parallel to the ground and evenly distribute the force.
Attention: High pressure pumps have strict requirements for the inlet medium compared to other pumps. It is recommended to add a filter.
Fax: 0576-89888385
Address:4th Floor, Building 2, No. 78 Huibin Road, Xinqian Street, Huangyan District, Taizhou City, Zhejiang Province
Email: vic@tz-fet.com
