How to accurately select a pneumatic booster pump?

With the advancement of technology and the rapid development of industry, many industries require a significant increase in pressure for gas sources or hydraulic systems, which is why pneumatic boosting products are used. However, when faced with a variety of pneumatic boosting products, it is often difficult to choose which specifications and models to purchase. In this article, the editor will briefly explain what type of pneumatic booster pump to choose in various situations.

Pneumatic booster pumps can be classified according to the medium, including air booster pumps, gas booster pumps, gas-liquid booster pumps, and special medium booster pumps. Firstly, select the correct booster pump according to the medium (such as air booster pump for air, gas booster pump for nitrogen, etc.). You can also tell the sales engineers of Taizhou Feentor about the boosting medium and ask them to help choose it.

After selecting the correct category, it is necessary to choose the model according to pressure and flow rate. For example, if the compressed air in the factory is 6 bar, it needs to be pressurized to 8 bar, and the flow rate for one cylinder is about 320L/min. In this case, the ZTS-ZTM02 air boosting system is used to boost the existing 6bar compressed air to 12bar and store it in a gas storage tank. After being reduced to 8bar through a pressure reducing valve, the 8bar gas can be stably output to the cylinder for use. The flow rate of ZTM02 air booster pump is 580L/min, which is sufficient to meet its flow problem. It is necessary to contact the sales engineer for this, as both flow rate and pressure are affected by the factory's gas source pressure, flow rate, and on-site environment. There may be some differences in selecting solely based on the parameters of the pneumatic booster pump.

After selecting the category and model, accessories should be selected based on the on-site usage conditions. If the pressure reaches the required level, a binary regulator can be used to adjust the output pressure. How long does the on-site workpiece need to maintain pressure for automatic pressure relief? It is necessary to choose PLC control accessories and use them in conjunction with pneumatic valves. If there is excessive dust on site, such as in textile workshops, paper workshops, etc., enclosed enclosures should be equipped. Specific requirements can be customized by contacting Feentor engineers.

The air booster pump, gas booster pump, liquid booster pump, and special medium booster pump produced by Feentor Fluid Control Co., Ltd. can be combined with equipment suitable for customers based on their actual working conditions and on-site environment.

Gas Booster Pump

Taizhou Feentor specializes in producing main products including air booster pumps, gas booster pumps, liquid booster pumps, industry-specific pneumatic pumps, pneumatic booster equipment, blasting test benches, water pressure testing equipment, and air tightness testing devices

Air booster pump