Mobile phone: 18815239758 (same as WeChat)
Phone: 0576-89881178
Phone: 0576-89825885
Explanation of terms for pneumatic booster pump
The Feentor pressure booster pump is also known as an air booster pump, gas booster pump, air amplifier, pneumatic booster pump, gas booster pump, gas booster valve, air booster valve, and so on.
Parameters of pneumatic booster pump:
The parameters for boosting air with the air pressure booster pump are as follows:
1. Output pressure 0-40 bar
2. Flow rate: 1360 liters/min
3. Gas consumption: 500-1 cubic meter/min
4. Boosting pump 0.6:1-5:1
5. The gas storage tank can be configured with 10L/20L, 40L/100L
The parameters for gas pressurization of the pressure boosting pump are as follows
1. Drive air pressure: 2-8 bar
2. Maximum flow rate: 960 liters/min
3. Gas consumption: 800 liters per minute
4. Output pressure up to 80MPa
5. Boost ratio: 2; 1—100:1
Application scope of pneumatic booster pump:
1. Product air tightness test, air pressure test.
2. The factory's gas source is locally pressurized, and the cylinder pressure is insufficient to supply gas.
3. The pressure of the hot flow top needle valve is insufficient and unstable.
4. Expensive gas recycling and reuse.
5. The nitrogen protection gas inside the equipment is circulated and reused.
6. Destructive testing of products, etc.
The role of pneumatic booster pumps in industrial production is becoming increasingly evident. If you want to obtain first-hand information, you can visit the Taizhou Feentor website www.tz-fet.com
The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted
Fax: 0576-89888385
Address:4th Floor, Building 2, No. 78 Huibin Road, Xinqian Street, Huangyan District, Taizhou City, Zhejiang Province
Email: vic@tz-fet.com
