Mobile phone: 18815239758 (same as WeChat)
Phone: 0576-89881178
Phone: 0576-89825885
How to install an air booster pump
The correct installation method of pneumatic air booster pump
If the pneumatic air booster pump is installed incorrectly, it can easily lead to insufficient flow after boosting Long term use can cause damage to the directional valve and sealing ring Below is the correct installation method for the air booster pump:
Firstly, determine what the three ports of the booster pump are used for, as shown in the following diagram
2. The first step is to fix the booster pump to the machinery or other places with screws. The following figure shows the fixing port
3. The booster pump is driven by connecting items and the correct method It is recommended to use a 4-point air intake for driving the air intake
4. The low-pressure intake connection generally uses a 4-point quick plug
There are generally two types of high voltage outlets: card sleeve connection and quick plug connection The advantage of card sleeve connection is that the pipeline has high pressure resistance and does not need to be replaced frequently The disadvantage is that it is difficult for beginners to connect.
Advantages of fast plug connection Simple, convenient, and fast Disadvantages: Low pressure resistance and easy aging of the trachea.
Legal statement: The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted
Fax: 0576-89888385
Address:4th Floor, Building 2, No. 78 Huibin Road, Xinqian Street, Huangyan District, Taizhou City, Zhejiang Province
Email: vic@tz-fet.com
