Carbon dioxide booster pump for supercritical experiment extraction of carbon dioxide

---

Carbon dioxide supercritical test extraction using a carbon dioxide booster pump. Carbon dioxide supercritical refers to the gaseous carbon dioxide that exceeds the critical temperature and pressure of the substance gas-liquid. According to different fields, it can also be called high-density gas, high-pressure gas, ultra-high pressure gas or fluid, etc. Carbon dioxide gas in a supercritical state has properties similar to liquid density, low surface tension, higher thermal conductivity than atmospheric gas, and lower viscosity.

READ MORE

Operation steps of water pressure testing equipment, list of physical pictures of blasting test bench

---

The operation steps of the water pressure testing equipment are to fill the test piece and water tank with water in advance (the water should be clean and free of impurities). According to the thread specifications of the test piece, connect the high-pressure pipeline outlet of the testing equipment to the air source drive port with a diameter of 12 and a 220V power supply (three hole socket)

READ MORE

Introduction to the functions of the pressure gauge calibration table, what is its principle?

---

The pressure gauge calibration platform uses a gas-liquid booster as the pressure source: it uses compressed air as the power source, and outputs hydraulic pressure proportional to the driving gas source pressure. By adjusting the pressure of the driving gas source, the corresponding hydraulic pressure can be obtained. According to the different pressures of the test piece, adjust the driving gas pressure, and the gas-liquid booster produces high-pressure liquid. After passing through the pressure control system, it is transported to the test piece through the high-pressure pipeline for pressure gauge calibration. The structure and function of the pressure gauge calibration table are composed of a boosting system and an operating table. The boosting system uses a gas-liquid booster, and different gas-liquid boosters are selected for boosting tests based on the tested components.

READ MORE

Analysis of Typical Application Cases of Air Boosting Pump

---

Analysis of typical application cases of air booster pump Preface: Air booster pump, also known as air booster pump, gas amplifier, pressure booster pump, etc., is a pneumatic booster product. Widely used in gas pressurization and output applications. Below are several typical application cases. 1、 Some equipment in the factory requires high voltage.

READ MORE

What is the difference between high-pressure gas booster pump and low-pressure gas booster pump

---

Low pressure gas booster pumps generally have one compression process, while high-pressure gas booster pumps have two or more compression processes. The initial pressure of ordinary gas will not exceed 8 bar, and due to the limitation of the cylinder diameter stroke of the booster pump, low and medium pressure can basically reach the required pressure in one compression. High pressure or high pressure requires two or more compressions to meet the usage requirements. They are all affected by those factors, the air booster pump editor will take you to understand.

READ MORE