High pressure nitrogen booster pump nitrogen booster system

High pressure nitrogen booster pump nitrogen booster system

Working Principle:

Pneumatic nitrogen booster pump is a type of pneumatic booster pump Use an air directional valve to control the reciprocating motion of the booster pump A booster pump that uses low air pressure to drive a large piston and a small piston to generate high air pressure Nitrogen can be pressurized up to 160MPa. Depending on the initial pressure of the pressurized nitrogen, a single-stage booster pump or a two-stage booster pump can be selected.

Nitrogen booster pump

Characteristics of high-pressure nitrogen booster pump:

1. High output pressure: rated pressure of 160MPa.

2. Wide application range: nitrogen assisted injection molding Air tightness inspection Nitrogen tank, etc.

3. Wide output range: The booster pump increases the boost pressure according to the different driving pressures, and the pressure after boosting is also different The intake pressure can be adjusted to obtain various pressures after turbocharging.

4. Flexible application: Choose different models of booster pumps Different flow rates and pressures can be obtained.

5. Automatic pressure maintenance: Any reason causing a decrease in pressure after pressurization The booster pump will automatically start Supplement stress When the pressure reaches the set point, the booster pump automatically enters the pressure holding mode The pressure holding mode does not consume the driving gas source.

6. Operation safety: Gas driven non electric sparks can be used in various explosion-proof situations.

7. Small size: convenient for installation in various places.

8. Easy to operate and install: Simply connect the gas pipeline booster pump for installation and it will work Adjust the driving air source to reach the preset pressure.

9. System advantage: Adding a high-pressure gauge with the booster pump as the core component High pressure needle valve Drive switch Unloading valve. High pressure tank Various enclosures Composed of high-pressure pipelines and other components The gas pressure after pressurization can be observed intuitively Stable output of nitrogen after pressurization After testing or canning Safely relieve the pressure in the pipeline.

High pressure nitrogen booster pump

Typical applications:

1. Valves pipe fitting. Pressure vessel. Voltage withstand test or explosion test.

2. Tighten the air circuit chuck of the machine tool.

3. Inflate the accumulator.

4. Insufficient and increased air pressure of various types.

High pressure nitrogen pressurization system