Pneumatic booster pump

Pneumatic booster pump, also known as gas driven air booster pump, uses gas (air, nitrogen, etc.) as the driving source A booster pump that boosts air pressure.

Driving principle: When the air source enters the reversing valve, it pushes the reversing valve to work back and forth Plays the role of a five position three-way valve When gas flows to either end of the piston The piston pushes the control valve at the upper and lower ends of its stroke Alternating pressurization and ventilation of the large area of the slide valve To control the reciprocating motion of airflow towards the piston Maintain a cyclic state When gas is discharged from the pump, it must pass through a muffler.

Output pressure 0-40 bar

Flow rate: 400-1400Ln/min

Boost ratio 1:2-1:10

Storage tank selection: Stainless steel or carbon steel 20-300L

The commonly used types of air driven booster pumps are 2x and 5x booster pumps It is divided into high flow and low flow booster pumps The choice mainly depends on the actual usage of each factory First, we need to know what the initial air pressure is? How much pressure do we need to increase? What is the required traffic volume? Do you want stable pressure output? You can check the self-service selection for details. If the air needs to be pressurized to a high pressure, a gas booster pump can be used to boost the air An air driven booster pump cannot boost gas The reason is that the internal structure is different.

Air booster pump

Pneumatic booster pump