High pressure nitrogen boosting equipment

Performance and characteristics of gas spring pressurization equipment:

The gas boosting unit is an advanced boosting equipment independently researched and developed by our company. This device uses compressed air as power to pressurize gases such as air, oxygen, nitrogen, carbon dioxide, etc. This device is an independent boosting unit, connected in series in the boosted pipeline. It has the characteristics of fast boosting speed, long service life, stable pressure, large flow rate, simple operation, convenient maintenance, and use.

2. Application scope of gas spring pressurization equipment: air conditioning coil detection, valve airtightness detection, pressure vessel detection, constant replenishment of gas in the storage tank, ordinary compressor to increase air pressure, pneumatic valve pneumatic actuator, coordinate measuring instrument, pneumatic marking machine, CNC machine tool clamping device, pneumatic strapping machine, inkjet printer, cylinder clamping force insufficient and other places.

Individual or partial devices in the gas path require high pressure.

When the pressure in the main air circuit of the factory drops and the low operating pressure of the pneumatic device cannot be guaranteed, a booster pump is used to provide high-pressure gas to maintain the normal operation of the pneumatic device.

3. Large caliber cylinders cannot be configured, but the output force must be ensured.

4. Pneumatic remote operation requires pressurization to compensate for pressure loss.

5. It is necessary to increase the hydraulic pressure of the linkage cylinder.

6. I hope to shorten the time it takes to inflate the gas cylinder to a certain pressure.

7. Used for airtightness testing.

8. Used for filling various gases.

3. Automatic pressure maintenance of gas spring pressurization equipment: Regardless of the reason for the pressure drop in the pressure maintenance circuit, the booster pump will automatically start to supplement the leakage pressure and maintain a constant circuit pressure.

4. Operation of gas spring pressurization equipment: It is driven by gas, without arc or spark, and is fully used in places with flammable and explosive liquids or gases.

5. Simple maintenance of gas spring pressurization equipment: Compared with other gas driven pumps, the pressurization pump can complete the same work, but it has fewer parts and seals, making maintenance simple

6. High cost-effectiveness of gas spring pressurization equipment: The booster pump is a plunger pump that rapidly reciprocates during operation. As the output pressure increases, the pump's reciprocating motion slows down until it stops. At this point, the pump's pressure remains constant, energy consumption is low, and all components stop moving.

7. Advantages of gas spring pressurization equipment:

1) Compared with traditional gas superchargers, this supercharger produces smaller pulses and has stable pressure output. The output pressure value can be adjusted to the allowable pressure range in the working environment through an additional pressure reducing valve.

2) Compared with high-pressure air compressor systems and high-pressure compressors, this unit has low noise and low input costs. When the set pressure is reached, there is no additional energy consumption, so its energy consumption is small and energy-saving.

3) Easy to use. The turbocharger is fully pneumatic controlled, connected to the driving gas inlet, the pressurized gas inlet, and the pressurized gas outlet to operate; By adjusting the pressure of the driving gas source, the pressure of the pressurized gas can be infinitely adjusted.

Some gas springs require pressures ranging from 50 bar to 200 bar. The nitrogen source is mainly composed of two parts. One part comes from bottled nitrogen gas, with a pressure of generally 130 bar, which cannot be filled at half the pressure, resulting in half of the nitrogen source being unusable. The other part comes from a nitrogen generator, with a pressure of generally 5-10 bar, which cannot inflate the nitrogen spring. Fuente Company has solved the problem of inflating the nitrogen spring by addressing the above issues. The specific plan is as follows: ZTA series gas booster pump or ZTD series gas booster pump, which are single-stage single acting pump and single-stage double acting booster pump respectively, both have requirements for inlet pressure. They can use the gas in the nitrogen cylinder at a very low pressure to achieve zero waste and solve the problem of inflating the nitrogen gas spring. The ZTT series gas booster pump requires an inlet pressure of 1-10 bar and is a two-stage double acting booster pump that can increase extremely low air pressure to high pressure. According to the pressure level, it can be divided into ZTT25/ZTT40/ZTT60/ZTT100.

For the nitrogen source from the nitrogen generator, if the inlet pressure is a bit low for the booster pump, only a two-stage booster pump can be selected

Nitrogen booster pump