Requirements of air source for air booster pump

Technical support inquiry / 2026-08-18 08:58:22 空气增压泵

Air booster pumps are increasingly being used in industrial production by most factories, but it is important to note that there are requirements for the air source when using them

1、 Air source quality standard: Please choose a clean air source to ensure that the pump can work continuously and stably. Meet the requirements in the table below.

2、 Air source lubrication: When the air booster pump leaves the factory, all moving parts have been coated with an appropriate amount of lubricating oil, and generally do not require lubrication. If it is driven by dry compressed gas for a long time, it is recommended to add an appropriate amount of lubricating oil to the oil cup of the binary system for oil mist lubrication.

3、 Gas source pressure: The low driving pressure of this pump is 1.5-2 bar, and the design driving pressure is 10 bar. It is recommended to keep the usage period between 6-8 bar. The required operating pressure can be achieved by adjusting the pressure of the pressure regulating valve.

4、 The driving pressure of the air booster pump cannot exceed 10 bar. If it is driven through pipeline air, there must be reliable pressure reducing valves and relief valves.

5、 Connection pipeline: Select appropriate inlet and outlet connection pipelines based on the output pressure and flow rate of the air booster pump to ensure that they can withstand the pump's output pressure and flow rate.

6、 The diameter of the connecting pipeline of the drive port of the air booster pump should be slightly larger than the nominal size of the connecting thread of the pump's drive port. If the connecting diameter becomes smaller, it will greatly affect the working efficiency of the pump!

7、 All pneumatic booster pumps have been lubricated before leaving the factory, and no special lubrication or maintenance is required during operation. Only apply appropriate lubricating grease when disassembling and repairing.

Attention: If it is necessary to replace seals or important vulnerable parts during maintenance, it is recommended to use products from Taizhou Feentor to ensure the normal operation of your pump.