The principle of air pressure boosting valve
The Feentor air booster valve adopts a single gas controlled unbalanced gas distribution valve to achieve the reciprocating motion of the pump. The valve body is made of aluminum alloy and stainless steel, and all seals are imported high-quality products. The designed driving pressure is 10 bar. To ensure the service life of the valve, it is recommended that the driving pressure be ≤ 8 bar.
The driving piston diameter of this series of valves is 80-160mm, which is a single acting valve. All single acting air valve pump heads are equipped with exhaust cooling.
Feentor air booster valve, also known as air booster pump, gas amplifier, or gas driven booster, is characterized by no need for electricity and easy and flexible operation;
The factory's air pressure can be increased by 2-5 times by simply connecting it to the pressure pipeline on the production line to obtain a higher pressure and compensate for the local pressure shortage in the factory.
The specific scope of use of the air boost valve is:
1. High pressure is required in the gas circuit or individual devices.
2. High pressure is required for certain devices in the air circuit, and the single space is narrow. Large diameter cylinder heads cannot be configured, but it is necessary to ensure that the output pressure meets the requirements.
3. Pneumatic remote operation requires pressurization to compensate for pressure loss.
4. The equipment pressure requirements of end users in the gas circuit include various high pressure outputs.
5. It is necessary to shorten the time required to fill a trachea and container with pressure
Parameters of air pressure boosting valve:
Cylinder diameter: 80-160mm
Flow rate: 1360 liters per minute
Boost ratio: 2:1-5:1
Output pressure: 0-40 bar
Storage tank configuration: 10-40 liters per minute (stable output pressure, reduced pulsation)
The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted
相关推荐: