Mobile phone: 18815239758 (same as WeChat)
Phone: 0576-89881178
Phone: 0576-89825885
Pneumatic hydraulic pump
Pneumatic hydraulic pump is powered by compressed air, which uses the low pressure of compressed air to push a large area piston and drive a high hydraulic pressure at the small area piston end. The boost ratio is the area ratio of the large and small pistons. When the pneumatic hydraulic pump is working, the compressed air pushes the piston to move back and forth, and the booster cylinder sucks pure liquid into the equipment or the tested container through a one-way valve. When the liquid reaches the set pressure, the pneumatic hydraulic pump stops working and maintains the pressure. At this time, the booster pump has no consumption.
Pneumatic hydraulic pumps mainly use non corrosive low viscosity liquids as the medium for pressurization, with a pressurization range of 0-640MPa (6400 kg) and a flow rate of 0.79-60L/min. It is recommended to drive the gas source at 2-8 bar (2-8 kg) and consume 0-800L/min.
Pneumatic hydraulic pumps are suitable for mining, shipbuilding, machinery, petrochemicals and other fields, especially for pressure detection, hydrostatic blasting and other fields.
That's all for the knowledge of pneumatic hydraulic pumps. If you have anything else to learn, feel free to consult our company website at any time http://www.tz-fet.com/
The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted
Fax: 0576-89888385
Address:4th Floor, Building 2, No. 78 Huibin Road, Xinqian Street, Huangyan District, Taizhou City, Zhejiang Province
Email: vic@tz-fet.com
