Hydraulic testing system - Introduction to liquid booster pump - Taizhou Fuente Fluid Control Co., Ltd

Water pressure testing system - Introduction to liquid booster pump

1、 Noun Explanation

The hydrostatic testing system is a system that uses water, hydraulic oil, emulsion, and other working media, with an output pressure of up to 640MPA. Similar to the principle of pneumatic testing systems, the core components are mostly pneumatic pumps or electric pumps. It is a static hydrostatic testing system, and if it is a dynamic testing system, it generally refers to pulse and water hammer tests;

2、 Constituent components

The core component of the water pressure testing system is the liquid booster pump.

The Feentor liquid booster pump is a reciprocating piston pump powered by a gas source, with output pressure proportional to the driving air pressure. The booster medium is water, oil, and emulsion as the core. It is widely used in static water pressure testing systems due to its simple operation, convenient maintenance, and fast boosting speed.

Three control methods

The Feentor water pressure test washing machine is generally divided into three control modes: manual, semi-automatic, and fully automatic;

Manual type: The output pressure and holding time are controlled by the needle valve switch and manual timing;

Semi automatic type: The output pressure and holding time can be set for semi-automatic operation. The core component, the liquid booster pump, can automatically enter the holding time after reaching pressure, with simple alarm and emergency button operations;

Fully automatic type: including tooling docking, all realize real-time monitoring of pressure rise and fall changes, printing pressure rise and fall curves, and automatically judge whether the product is qualified or not;

4、 Application scope

What is the specific scope of use for the static water pressure testing system and liquid booster pump

Water pressure and burst testing of products such as valves, fittings, containers, etc

Replace the original hydraulic station for easy maintenance and portability

The hydraulic part of the bolt and nut tensioner industry provides power source

Pressure testing in marine environments such as wellhead oil trees

Destructive testing of pressure volume products

5、 Technical parameters

Output pressure: 0-600MPA

Output flow rate: 50L/min

Gas consumption: 1m ³/min

Control mode: manual PLC、 computer

6、 Equipment advantages

Static water pressure testing system, characterized by high flow rate and wide pressure range

The core component, the Feentor  liquid booster pump, is lightweight and easy to maintain

Control: Multiple control methods are easy to control

Wide range of applicable media: suitable for the vast majority of liquids

Environmental Protection: Pneumatic Boosting Products, Energy Saving and Emission Reduction

Safety: The liquid booster pump does not require electricity and can be used in hazardous environments

Legal statement: The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted