Today, the editor will share with you the typical application of butane booster pump. Firstly, when understanding its application, let's first understand its working principle and parameters
The butane booster pump is a piston reciprocating booster pump powered by compressed air. The reciprocating switching of the pump is controlled by the pneumatic directional valve on the booster pump. When the output pressure increases, the reciprocating operation of the butane pump will slow down until it stops. At this time, the air consumption of the booster pump is the smallest. When the pressure is unbalanced, the fixed pump will continue to operate in a reciprocating manner.
The parameters of the butane booster pump are as follows
Driving pressure: 2-8 bar (driving pressure range for driving butane booster pump)
Output pressure: 0-32 bar (by adjusting the drive to regulate the output pressure of the butane pump)
Flow rate: 50 liters/min (approximate flow rate under driving pressure of 6 bar and butane inlet pressure of 6 bar)
Boost ratio: 4:1 (area difference between drive piston and boost piston)
Drive port: G1/2 butane input port ZG1/2 butane output port ZG1/2
Application scope of butane booster pump:
1. Used in the pearl foam and XPS extruded insulation board industry
2. Low pressure butane recovery and use in butane cold tank
3. Provide sufficient butane flow and pressure for metering pumps in the foaming industry
Characteristics of butane output booster pump:
1. Pneumatic boosting products, explosion-proof, safe and spark free
2. With a large flow rate, it can meet the pressure and flow requirements of the vast majority of foam metering pumps
3. Long lifespan and extremely high durability
4. Easy to operate and simple to maintain
Legal statement: The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted