Do you know what to pay attention to when gas is pressurized again?

With the advancement of industry and the development of technology, major factories or laboratories can no longer meet the gas pressure requirements of air compressors, various gas generators, or 40L steel cylinders. What should we do now? There are two solutions: 1. Purchase a high-pressure air compressor or various high-pressure gas cylinders. Purchase gas secondary pressurization equipment. Here is a brief explanation of what situations to pay attention to and what kind of boosting equipment to choose for gas secondary boosting.

The first step in secondary gas pressurization is to understand the operating conditions that require pressurization. Here are a few simple examples to avoid taking unnecessary detours: 1. What medium is being pressurized? (Some media with special properties, such as gaseous carbon dioxide, have low temperatures and are prone to enter the supercritical point. When the pressure is increased, it is easy to form dry ice, and so on, which requires the use of Fuente CO2 gas specific pressurization equipment.). 2: How much pressure should be increased and what is the initial pressure? (Regarding the subsequent selection, if we need to increase the nitrogen pressure from 0.6MPa to 3MPa on site, choosing the wrong model to increase the pressure to 1.6MPa would be a mistake.). 3: Is the pressure resistance value of the high-pressure pipeline on site sufficient? If the pressure resistance of the pipeline is not sufficient after pressurization, it is dangerous and can easily cause explosions. 4: Traffic issues? The current boosting equipment has a characteristic that the higher the pressure, the smaller the flow rate, so this situation should be taken into account. 5: What is the on-site driving power source? The Feentor  gas booster pump is driven by compressed gas. 6: Should the pressurized gas output be stable or just reach pressure? To achieve stable output, a buffer tank is required. As long as the pressure is reached, only one Fuente brand gas booster pump is needed.

After knowing these conditions, the only option left is to choose a gas secondary boosting equipment. Firstly, the goal should be to save energy and reduce emissions. If the factory or laboratory has sufficient gas sources, the Feentor  gas boosting system is more suitable. If the gas source is already insufficient, electric boosting equipment should be chosen. If used occasionally, choose Fuente gas booster. The main factor in choosing gas boosting equipment is to contact sales specialists based on the on-site working conditions.

Legal statement: The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted