Mobile phone: 18815239758 (same as WeChat)
Phone: 0576-89881178
Phone: 0576-89825885
Main technical parameters of accumulator nitrogen filling system (gas boosting system)
Main technical parameters of nitrogen boosting system for accumulator
1: Product Name: Gas Boosting System
2: Parameters: Drive air pressure: 0.3-1MPA, output: 25MPA; SNS Triple Unit 1: including gas water separator, oil mist device, pressure regulating valve; Drive one pressure gauge: 1.6MPA - φ 60; One high-pressure output pressure gauge: shock resistant 35MPA - φ 100; One driving gas switch: 8MPA; 1 high-pressure needle valve: stainless steel pressure resistant to 50MPA; One high-pressure relief valve: made of stainless steel with a pressure resistance of 50MPA; System framework 1: 304 stainless steel; Two three-way connectors: 316 stainless steel with a pressure resistance of 50MPA; 3 pressure gauge connectors: 316 stainless steel pressure resistant to 50MPA; 8 pieces of φ 6 card sleeve connectors: 316 stainless steel pressure resistant to 50MPA; Stainless steel pipe 2-3 meters: pressure resistant to 100MPA; Nitrogen inlet pipeline 12 meters: pressure resistant to 50MPA (with nitrogen cylinder connector); Nitrogen outlet pipe 5 meters: pressure resistant to 50MPA (with outlet connector); Six pieces of 10PU pipes and 1/2- φ 10 quick plugs.
3: Compressed gas drive, used for gas pressurization.
Do you have any further knowledge about the main technical parameters of the nitrogen charging system (gas boosting system) for the accumulator? You can access our website http://www.tz-fet.com/
Fax: 0576-89888385
Address:4th Floor, Building 2, No. 78 Huibin Road, Xinqian Street, Huangyan District, Taizhou City, Zhejiang Province
Email: vic@tz-fet.com
