How to adjust the pneumatic liquid booster pump

How to adjust the pneumatic liquid booster pump? For users who use pneumatic liquid booster pumps, it is not a big deal, but for first-time users, improper operation can cause damage to the tested parts due to high pressure. Below, the editor will summarize the details that should be paid attention to when using it for the first time.

Firstly, it is necessary to ensure that the liquid booster pump is connected according to the manufacturer's requirements when using it for the first time. Do not use accessories that are lower than the operating pressure of the liquid booster pump, such as high-pressure pipelines, clamp fittings, high-pressure switches, etc. Connect according to the usage requirements using appropriate accessories, and then check for leaks (slight leaks due to differences in hydraulic and air pressure can cause significant pressure fluctuations, and further pressurization can create pulses that affect the precision components of the product). After meeting the above conditions, check whether the driving air source meets the usage requirements, whether the pressurized medium is pure and connected properly. After completing the above steps, open the starting air source, adjust the pressure regulating valve on the two connected units, and adjust the pressure from 0 to the desired pressure. When there is liquid discharged from the high-pressure outlet of the liquid booster pump, it proves that the air in the booster cylinder is completely discharged. Cut off the driving air source, connect the tested part, and then open the air source. If the pressure bearing capacity is tested for a long time, there is no need to cut off the gas source. There are two methods to test the sealing: 1. Cut off the gas source and check the pressure drop. 2. Keep the gas source unobstructed and check for leaks.

That's all for the knowledge about liquid booster pumps. If you have any further questions, please visit our website http://www.tz-fet.com/

The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted