What are the types of pneumatic booster pumps included?

What are the types of dynamic booster pumps included?

Pumps that use gas as a power source to boost other media are collectively referred to as pneumatic booster pumps. Pneumatic booster pumps include gas-liquid booster pumps to boost various non corrosive, low viscosity, and pure liquids, air booster pumps to boost clean compressed air, and gas booster pumps to boost various non corrosive and clean gases. Other special media may be customized. Below is a brief introduction to the corresponding models of various pneumatic booster pumps.

Pneumatic liquid booster pump: It can be divided into the following series based on flow rate and pressure.

ZTM series pneumatic liquid booster pump: pump body diameter 80mm, boosting value 80MPA. This model has a small flow rate and pump body, making it suitable for use in situations where visibility is small and flow requirements are low.

ZTG series pneumatic liquid booster pump: pump body diameter 160mm, boost value 320MPA. This product has a high pressure and large cylinder diameter, suitable for long-term static pressure testing or blasting use.

ZTGD series pneumatic liquid booster pump: pump body diameter 160mm, boost value 320MPA. This booster pump has twice the flow rate of the ZTG series, possessing all the advantages of ZTG and suitable for high-pressure conveying.

Pneumatic liquid booster pump can be customized according to other pressures or special requirements.

Pneumatic air booster pump: It can be divided into the following types based on pressure and flow rate.

ZTM02 air booster pump: This booster pump is a 2x booster pump (2x booster pump is compressed air pressure x 2), with a flow rate of 580L/min, suitable for equipment with low air consumption.

ZTV02 air booster pump: This booster pump is a 2x booster pump with a flow rate of 1200L/min, suitable for equipment with high air consumption.

ZTM03 air booster pump: This booster pump is a 3x booster pump with a flow rate of 580L/min, suitable for equipment with slightly higher air consumption and pressure.

ZTV05 air booster pump: This booster pump is a 5-fold booster pump with a flow rate of 360L/min, suitable for equipment with high air consumption and pressure.

A gas booster pump can be used instead of one with higher air pressure. Due to its own reasons, an air booster pump cannot replace a gas booster pump.

Pneumatic gas booster pump: It can be divided into the following series according to different pressures and flow rates.

ZTA series pneumatic gas booster pump: This booster pump can boost gas to a pressure of 80MPA, with a small flow rate suitable for equipment with low gas consumption. The corresponding inlet pressure also varies depending on the boosting ratio.

ZTD series pneumatic gas booster pump: This booster pump can boost gas to a pressure of 80MPA, with a large flow rate suitable for equipment with high gas consumption. The corresponding inlet pressure also varies depending on the boosting ratio.

ZTT series pneumatic gas booster pump: This booster pump can boost the gas pressure to 80MPA. The ZTT series booster pump is a two-stage booster pump suitable for use when the pressurized medium is low