Why is a pneumatic gas booster pump equipped with a gas storage tank? How to match the air storage tank below?

Why is a pneumatic gas booster pump equipped with a gas storage tank? How to match the air storage tank below?

In the previous article, the editor introduced the principle of pneumatic gas booster pump. In this article, we will delve into why a pneumatic gas booster pump needs to be equipped with a gas storage tank and how to properly equip it?

First, let's understand why a gas storage tank is needed? Due to the inherent reasons of the pneumatic gas booster pump, the pressurized gas is not constantly output but instead acts like a piston air compressor, with one output after another. This can cause some equipment to malfunction due to pulse usage, requiring a gas storage tank to alleviate the impact of pulses and the high flow demand for instantaneous release.

So how to match the air storage tank more appropriately? This involves how much flow and pressure the pneumatic booster pump boosts per minute. Generally, the pressure resistance of the gas storage tank should be higher than the higher pressure generated by the booster pump. Secondly, it is important to note that the size of the gas storage tank should correspond to the flow rate of the pneumatic booster pump. For example, the flow rate of the Fuente ZTV02 is 1200L/min, and a 20L gas storage tank will appear smaller, causing the booster pump to work frequently and increasing its workload, which will affect the service life of the booster pump. It is less necessary to equip a 40L gas tank to provide a buffer capacity. The third thing to note is that the interface of the gas storage tank should not affect the flow rate due to its small size. For example, if the flow rate of the Fuente ZTV02-3 is 4000L/min and you use a 3-minute inlet for the interface, the instantaneous gas output from the booster pump to the gas storage tank will not reach 4000L/min. Therefore, it is meaningless to equip it with ZTV02-3.

Below, the editor will give you an explanation about why pneumatic gas booster pumps need to be equipped with gas storage tanks? How to match the air storage tank below? If you have any questions about this introduction, you can contact our technical staff Zhao at 18815239658 to help you answer them.