How to increase the flow rate of gas booster pump

    Technical support inquiry / 2026-08-12 10:13:48 气体增压泵

    Let me introduce how to increase the flow rate of a gas booster pump. Firstly, I will introduce several common factors that affect the flow rate of a gas booster pump


    1. The driving air pressure is too low and the driving air flow is insufficient.


    2. The diameter of the driving trachea should not be too thin.


    3. The inlet pressure of the pressurized medium is too low.


    4. High pressure seal wear.


    So what if the output flow rate of the gas booster pump increases?


    Firstly, ensure that the driving gas inlet pressure and flow rate of the gas booster pump are sufficient (pressure 6-8 bar, flow rate 1.1 m ³/min).


    Secondly, the pipeline for driving the gas source requires a diameter of 12mm to ensure sufficient intake for its driving.


    Furthermore, within the specified pressure range, the inlet pressure of the gas booster pump is increased, and the higher the inlet pressure, the greater the flow rate.


    During the use of a gas booster pump, it is essential to ensure the cleanliness of its surrounding environment. Only in this way can the gas booster pump provide you with longer working hours.


    You can choose based on the Feentor gas booster pump selection manual, or use Feentor two-stage double acting or single-stage double acting.

    Gas booster pumpElectric gas booster pump

    郑工

    LATEST NEWS

    点击阅读更多内容
    本站使用百度智能门户搭建 管理登录