Mobile phone: 18815239758 (same as WeChat)
Phone: 0576-89881178
Phone: 0576-89825885
The important role of gas booster pump in expensive gas recovery and utilization
Argon, helium, nitrogen and other gases are usually filled into steel cylinders for use, but there may be residual conditions or insufficient pressure during use. If discarded, the waste phenomenon is particularly serious, and the price of a cylinder of gas ranges from tens to thousands of yuan. At this time, the appearance of gas booster pumps solves a great problem for customers,
Let's first take a look at the schematic diagram of the gas booster pump
PA is the pressure inlet at the customer's site, which is pressurized through the first stage gas pressurization chamber and then enters the second stage gas pressurization chamber for secondary pressurization. Then it can be output through PB.
The inlet pressure of PA port can be as low as 0.1 bar. Greatly improves the utilization rate of gas booster pump for recovering expensive gases, and the PB outlet pressure can reach 80MPa
For the recycling and utilization of low-pressure expensive gases, the Fuente two-stage booster has multiple boost ratios for reference;
That's all for the introduction of the gas recovery booster pump. If you have any other questions, you can contact our sales engineer
You can refer to the "Selection Notice" in the gas booster pump selection manual
The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted
Fax: 0576-89888385
Address:4th Floor, Building 2, No. 78 Huibin Road, Xinqian Street, Huangyan District, Taizhou City, Zhejiang Province
Email: vic@tz-fet.com
