How to choose the correct gas booster pump

At present, there are more and more manufacturers of gas booster pumps in the domestic market, and the impact of foreign imports has led many customers to hesitate in choosing pneumatic booster pumps until they choose gas booster pumps that are not suitable for their work. Below, the gas booster pump editor will guide you in detail on how to choose the correct gas booster pump.

Firstly, we have already briefly introduced the selection process. If you haven't seen it, please click on how to select the booster pump. After selecting the right model, it is necessary to consider various occasions such as one's own factory or laboratory to choose the quality of the gas booster pump. For foreign ones, I only recommend 100 times or more, because currently in China, the quality of gas booster pumps with 100 times or more cannot compare with foreign ones. High imitation products with 100 times or less can reach international standards (some low-pressure gas booster pumps have already exceeded international standards). After removing imported ones, only domestic ones are left. In China, due to the gap in technology and experience, there is a big difference in price and quality, which tests the customer's keen eyes. This is easy to compare parameters, If the parameters can be met, let the seller write the parameters in the contract (now many small factories exaggerate the parameters of gas booster pumps frequently due to inadequate technology and cost savings, and our factory has measured the parameters). The second is to see if it has been refurbished (99% of a domestic brand's foreign goods are refurbished). After these two aspects are settled, it's up to the quality. The first factor that determines the quality is the material (most factories use aluminum alloy and nitrile rubber sealing rings, while our factory's booster cylinder uses 304 steel and sealing rings are imported from abroad to ensure their service life). The second is the maturity of the technology and the precision of the processing tools (if the technology is mature, it will correspondingly save energy consumption and increase the flow rate of the boosting medium. The higher the precision of the processing tools, the more precise the parts produced, and the higher the fit between the parts, which will reduce the subsequent maintenance workload).

Based on the above conclusion and response to national energy conservation and emission reduction, safety should be the main focus, and high-quality products should be selected as much as possible. If it is low voltage and only tested a few times, price should be the main consideration.

Legal statement: The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted