Mobile phone: 18815239758 (same as WeChat)
Phone: 0576-89881178
Phone: 0576-89825885
The difference between air booster pump and gas booster pump
1、 Similarities
1. Both air booster pumps and gas booster pumps can be considered as pneumatic booster products, which rely on the high pressure generated by the reciprocating motion of the internal piston.
2. The output pressure is adjusted based on the relationship between the boost ratio and the driving air pressure.
3. The overall part consists of three main parts: the booster cylinder body, the drive cylinder body, and the directional valve.
4. The level of air and gas booster pumps can be divided into single-stage and two-stage.
5. Their output flow rates are directly proportional to the driving gas and the pressurized gas.
2、 Different points
1. Air booster pump is suitable for working environments where the original air compression system needs to increase pressure. Gas is used to boost some gases, such as nitrogen, oxygen, helium, argon, and other gases that are not mixed with air.
2. An air booster pump cannot boost gas (except in special circumstances), while a gas booster pump can boost air.
3. Gas booster pumps have strict requirements for inlet pressure, while air requires an air pipe (3-8 bar).
3、 Additional note: In principle, an air booster pump can also boost gas, using gas to drive the pump for boosting purposes.
Legal statement: The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted
Fax: 0576-89888385
Address:4th Floor, Building 2, No. 78 Huibin Road, Xinqian Street, Huangyan District, Taizhou City, Zhejiang Province
Email: vic@tz-fet.com
