Pneumatic liquid booster pump - Feentor ZTG series single head pneumatic booster device details introduction.

Pneumatic liquid booster pump - Feentor ZTG series single head pneumatic booster device details introduction. The ZTG series pneumatic liquid booster pump adopts a single gas controlled non-equilibrium gas directional distribution valve to achieve reciprocating motion of the pump. The driving part of the pump body is treated with aluminum alloy oxidation, and the driving cylinder body is made of aluminum alloy with hard treatment. The high-pressure end is made of 304 stainless steel material, and the entire liquid receiving part is made of 304 stainless steel material, ensuring a beautiful appearance and strong oxidation resistance of the pump.

The Feentor ZTG series gas driven liquid booster pump, also known as a pneumatic pressure test pump, has a drive cylinder diameter of 160mm and various specifications of boost ratios for customers to choose from, ranging from 1:1 to 640:1. The boost ratio is the multiple ratio of the drive piston to the boost plunger. For example, if the boost ratio is 100:1, when the drive air pressure is 5bar, the output pressure will be 100 * 5=500bar=50Mpa. Customers need to choose the appropriate boost ratio according to their actual needs. Suggest leaving some margin. The inlet and outlet of the pneumatic liquid booster pump are equipped with one-way valves to prevent the backflow of liquid. The high-pressure output pressure can be adjusted through the pressure regulating valve on the pump, which is very simple to operate and has a strong working life.

What are the precautions to be taken for pneumatic liquid booster pumps? Firstly, it is necessary to ensure that the driving pressure and the pressurized liquid medium are clean. It is recommended to install an oil-water separator at the air driving end and a Y-shaped filter at the water inlet. Furthermore, it is necessary to fill the test piece with water in advance according to its volume size to shorten the inflation time. The following are the parameters of the gas-liquid booster pump.

Parameters of gas-liquid booster pump