Fuente Brand - Compressed Air Booster - A Good Helper for Local Air Pressure Boosting

Compressed air booster is a machine used to boost compressed air in factories. It plays a significant role in energy conservation and emission reduction in factories. However, many new customers currently have doubts about its use and selection. Now, the editor will introduce in detail some common knowledge issues of Fuente brand compressed air booster.

When purchasing this machine, it is important to understand how much pressure the compressed air on site can stabilize to, and to choose the compression ratio of the compressed air booster according to your own needs. Another aspect is what equipment is used locally for air pressure and the required flow rate (if you don't know how much flow rate, you can buy a bottle of nitrogen for testing). The requirements for gas storage tanks should also be taken into account. Generally speaking, the flow rate output by the pump should also correspond to the configured gas storage tank.

So what are the things to pay attention to when installing a compressed air supercharger for the first time?

1. Ensure that no impurities enter the pump body (this is important and cannot be taken lightly)

2. Ensure that all pipelines are installed correctly and that fasteners are not loose

3. Ensure smooth air intake, and there should be no dust, iron filings, rust, or solid particles not exceeding 5 μ m in the driving gas

4. Ensure that the inlet pressure is appropriate, 2-8 bar. During the debugging process, first adjust the drive pressure to 0 bar, then start the booster pump, and gradually adjust the drive pressure.

5. After installation and debugging are completed, run it idle for 1 minute to observe whether the booster pump works normally and whether there is any leakage in the pipeline

6. It is proposed to add a binary system in the drive circuit and ensure that the oil cup is filled with oil (5 drops/min)

If an air storage tank is added, it is necessary to ensure that the pump body and the air storage tank are securely and reliably fixed.

8. After receiving the goods, it is necessary to inspect the appearance and packaging for completeness. The manufacturer must make wooden boxes before shipping.

I hope everyone can refer to the precautions for selecting and initially using compressed air superchargers, and I hope it can be helpful to everyone

Compressed air booster pump3x compressed air boosting systemCompressed Air Turbocharger Air Boosting System