Technical requirements for compressed air boosting equipment

Technical Scheme for Compressed Air Boosting Equipment

The core component is the Feentor brand compressed air booster pump as the core of the boosting equipment, which is a domestically unique pneumatic boosting product formed by introducing advanced foreign technology

Features: Compressed air boosting equipment is a new type of equipment that uses factory air sources as power sources to boost air. The output pressure can be adjusted according to the driving air pressure, and the output pressure is twice the driving air pressure. When the output end is proportional to the driving air pressure

When the device stops working. If the output pressure drops, the boosting device automatically supplements the pressure and maintains the original multiple pressure unchanged.

Model significance

ZTS-ZTV02

ZTS - Code for Boosting System

ZTV air booster pump series

0 2--------- indicates that the boost ratio of the air booster pump is 2:1

What is the specific purpose of compressed air boosting equipment

Double the pressure of the factory's gas source from 2-8 bar to 0-16 bar

General configuration of the equipment

It consists of an air booster pump, an air storage tank, a pressure relief valve, a pressure gauge, a high-pressure pipeline, a pressure valve, a binary switch, etc

The usage method of compressed air boosting equipment is as follows:

(1) Connect the tested component and seal the pipeline interface tightly without leakage

(2) Adjust the driving air pressure (3-8 bar), turn off the high-pressure switch, turn on the intake switch, and start the boosting equipment

(3) When the pressure in the gas storage tank reaches a multiple of the gas source pressure or the required pressure, adjust the pressure reducing valve to the required pressure and turn on the high-pressure switch for use.

Gas consumption of the equipment: As this equipment is a pneumatic boosting device, it requires the customer to provide a gas source on-site for its use, which needs to meet the requirement of an air compressor with a capacity of about 1 cubic meter per minute,

Customer on-site usage video