What are the precautions for installing an air booster pump.

The Feentor ZTV02 series air booster pump is a product specially designed to solve the problem of low compressed air pressure in general situations. It has the characteristics of reliable structure, long service life, high stability, no need for electricity, and simple maintenance. This series of products can output higher pressure through self pressurization of compressed air. All pump bodies are made of aluminum alloy and stainless steel, and all seals are imported products. They can work continuously for a long time, and the driving pressure cannot exceed 8.3 Bar

The driving pressure connection range of the series air booster pump is (1Bar-8.3Bar max).

danger

Unauthorized changes or modifications to the system (mechanical, hydraulic, pneumatic, etc.) may cause damage to personnel and the system.

Operation

The working environment requires dust-free and non corrosive conditions.

Each booster pump is equipped with two L-legs, indicating that some notes indicate installation and space requirements.

Size of air booster pump

Gas source requirements

Gas source requirements

Gas access

It is recommended to configure a filter device with precision that meets our requirements, and to install an oil mist device on the drive inlet to lubricate the pump body itself (VG32 turbine oil is recommended to be added to the oil mist device, as other oils will accelerate the aging of the seals), as indicated by the drive interface (with annotations on the installation dimensions of the port threads).

Pipeline requirements

According to the output pressure of the pump, a pipeline that can withstand the pump output pressure must be selected.

start

Ensure that all interfaces are securely connected and the components are installed in place.
Adjust the pressure reducing valve to adjust the air pressure to O psi.
Turn on the intake switch and slowly increase the pressure reducing valve until the pump starts (under normal circumstances, the starting pressure of the pump is 15-20 psi). Continue to adjust and observe the high-pressure gauge to reach the pressure you need.

Air booster pump