How is the safety "connection" carried out for pipelines above 60Mpa of Fuente high-pressure pneumatic boosting equipment?

Technical support inquiry / 2026-07-23 14:21:40 气动增压设备

Feentor ultra-high pressure pneumatic boosting equipment can be used for high-pressure sealing testing, valve and pipe pressure testing, hydraulic tool testing, and more

Pneumatic booster equipment is a new product developed and designed for various pressure detection, suitable for gas seal testing, static pressure testing, and destructive testing of products. The modified device uses Feentor brand pneumatic booster pump as the power source, which can meet the water pressure, air pressure testing, and pressure holding testing of various pressure sections. The test pressure can be continuously adjusted, and the control method is flexible, which can meet the pressure testing of different products and different working conditions.

So, what method does Feentor use for connecting pipelines above 60Mpa pneumatic boosting equipment? In what aspects is its reliability performance reflected?

When the nut (right-handed) is tightened, the screw sleeve is tightened, and the screw sleeve is connected to the steel pipe through left-handed threads (to achieve anti loosening purpose), forcing the front conical surface of the steel pipe (57 ° -59 °) to press against the conical surface of the valve body by 60 °. By tightening force, the two conical surfaces achieve a hard seal of the metal contact line. It can be disassembled and installed in reverse, and the best sealing effect can be achieved by adjusting the extension length of the steel pipe on the screw sleeve.

Gas booster pump