Mobile phone: 18815239758 (same as WeChat)
Phone: 0576-89881178
Phone: 0576-89825885
Common knowledge that needs to be understood when using a liquid booster pump
There are many aspects of using a liquid booster pump that are worth adopting. Today, the editor will focus on introducing the requirements, parameters, and application scope of using a liquid booster pump.
Requirements for liquid booster pump: The customer is required to have a gas source on site to drive the pump (3-8 bar), and a water source (tap water, oil, emulsion, etc.) on site to output the booster liquid through pipelines, pressure gauges, valves, etc. (if the customer does not have it on site, Feentor can provide). The pump outlet should be matched with the workpiece on the customer's site using fixtures.
Liquid booster pump parameters: driving pressure 2-8bar, output pressure 0-400MPa, flow rate 0-50 liters per minute, boosting ratio 1:1-500:1. The pump can be operated as a control system in some valves, pipelines, pressure gauges, and boxes, which is convenient and durable.
The application scope of liquid booster pump is as follows
1. Pressure testing of pipelines and pressure vessels, static water pressure inspection of valves and fittings
2. Flow output and fluid pressure increase
3. Product destructive testing and local pressure resistance testing
4. Pressure gauge inspection and sensor pressure testing
5. Factory testing of various pressure components and on-site pressure calibration by customers
The knowledge of liquid booster pump will be introduced to you here. You can refer to our company's website www.tz-fet.com for information
Liquid pressurization system
The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted
Fax: 0576-89888385
Address:4th Floor, Building 2, No. 78 Huibin Road, Xinqian Street, Huangyan District, Taizhou City, Zhejiang Province
Email: vic@tz-fet.com
