The "Four Elements" of Nitrogen Boosting Selection Hurry up MARK!!

Technical support inquiry / 2026-08-05 09:36:00 台州菲恩特增压设备氮气增压

The four major elements for selecting a nitrogen booster pump are: driving pressure, output pressure, output flow rate, and inlet pressure

1、 The driving pressure is the power source for driving the nitrogen booster pump, and the general driving pressure range is 3-8 bar.

2、 Output pressure refers to how much nitrogen output pressure the customer needs to meet the on-site operating conditions. Does pressure require a stable output or is it sufficient to meet the required pressure?

3、 What is the desired output flow rate for the customer after nitrogen pressurization? Generally, we use standard units or Ln/min for conversion.

4、 The inlet pressure determines the selection and flow rate of the pump. The inlet pressure is generally divided into low pressure, medium pressure, or high pressure. For example, the pressure of a nitrogen generator is generally low pressure for secondary boosting, usually using a two-stage pump for boosting or ZTA series for boosting to medium high pressure.

After ZUI, several commonly used nitrogen booster pump models from Fuente are provided for your reference (as follows)

The ZUI high output pressure of ZTA02 is 20 bar, with a flow rate of approximately 960 L/min

The ZUI high output pressure of ZTA05 is 40bar, and the flow rate is 360L/min

The ZUI high output pressure of ZTT25 is 200 bar, and the flow rate is about 140 L/min

The above nitrogen booster pumps can be equipped with gas storage tanks to ensure stable pressure output. Of course, they can also be made into a complete control system for more convenient operation.