Can a gas booster pump increase the pressure to 20MPa?

    Nowadays, many devices or experiments require high-pressure gas, but the gas pressure inside the steel cylinder is not enough. How to solve this situation? Below, the editor will briefly introduce a solution to everyone.




    Firstly, the gas inside the steel cylinder will not exceed a pressure of 14MPa. To increase the pressure to 20MPa, the gas inside the cylinder needs to be compressed, which involves several issues. Firstly, the issue of gas purity is crucial, especially when conducting experiments that require high gas purity, such as 5 units of nitrogen gas. Therefore, a gas driven gas booster pump (Taizhou Feentor gas booster pump) should be used for sampling. One advantage of using a gas driven gas booster pump is that the driving cylinder and the booster cylinder are separated, which does not affect the gas purity or the test results. 2: Safety factor: With the advancement of technology, there is an increasing demand for different types of gases to be pressurized, which has led to the emergence of many dangerous and hazardous gases. These gases cannot come into contact with high temperatures or sparks, so it is also necessary to choose a Feentor gas booster pump. The booster pump uses air as a power source without generating electric sparks, and the driven air can also be used to lower the temperature of the booster pump, which can be used in various dangerous situations. Now that gas purity and safety can be guaranteed, it is necessary to choose the model. The gas inside the steel cylinder can be pressurized using the ZTA40 gas booster pump (the ZTA40 gas booster pump has a 40:1 gas ratio between the booster pump and the air compressor, and if the air compressor has a pressure of 0.6 MPa, the pressurized gas will be 24 MPa).


    Legal statement: The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted

    本站使用百度智能门户搭建 管理登录