What should I do if the air booster pump suddenly stops working?

    1、 What should I do if the air booster pump suddenly stops working?


    What if the air booster pump suddenly stops working during daily production in the factory workshop? Don't rush at this time, you can solve it through the following points.


    1. Check if the on-site driving air source (compressor) is turned on and if the driving air pressure meets the requirements of 3-8 bar


    2. Check if the internal air path of the directional valve is unobstructed, and open the clamp to check if the valve core seal is damaged.


    3. Use an air gun to blow the valve core and the interior of the valve body, and then apply lubricating grease to return to its original position.


    2、 What should be done if the working frequency of the compressed air booster pump is increased, the pressure boosting speed is slow, or the previous usage effect cannot be achieved?


    1. Check if the firing pins at both ends of the drive cylinder have become regular holes.


    2. Check if the sealing ring of the device is missing or damaged.


    3. Check if the spring on the device is deformed or damaged.


    3、 What should I do if the air booster increases the pressure but the pump doesn't stop working?


    1. Check whether there are impurities in the inlet and outlet one-way valves, or whether there are gaps in the one-way valve steel balls


    2. Check if the high-pressure sealing ring of the air booster is worn


    3. Check if the O-ring on the valve core of the air booster reversing valve is worn.


    The above problems with the air booster pump are encountered by customers during use. If you are unable to solve the above problems, you can contact the sales engineer for assistance. Anyway, I hope everyone can learn more about pneumatic booster pumps so that they can better serve everyone.

    空气增压泵

    本站使用百度智能门户搭建 管理登录