Specific parameter requirements and technical indicators for blasting test bench

Technical support inquiry / 2026-07-21 17:22:44 水压爆破试验台

1. Injection form: hydraulic blasting;

2. Pressure range: 0-30Mpa (refer to the following parameters for details)

3. Pressure gauge requirements: The pressure value at the moment of explosion can be determined, or the pressure gauge pointer at the moment of explosion can be fixed; Accuracy 0.1Mpa

4. Operation interface: There are "Start Test, Pause Test, Retest" switch buttons; (Adjustable communication)

5. Box size: length 1000 * width 500 * height 800 (mm), can be adjusted appropriately; Reference standard: can be used according to GB/T5568、GB7939、ISO6802、ISO6803、ISO8032、GB/T12722、GB16897、GB/T5563、GB/T10544、GB/T5568 Conduct pressure performance tests on hydraulic hoses, hydraulic hose assemblies, automotive brake pipes, powertrain pipes, and other pressure resistant components according to standards.

The so-called hydraulic explosive test bench is a method of using pressurized water to inject high-pressure water into the interior of the tested object, conducting destructive tests on the product, and also a static hydraulic destructive test to test the product's pressure resistance limit.

Blasting test benchBlasting test bench