Precautions for selection and use of high-pressure gas booster pump

    The editor will introduce some issues that need to be paid attention to when choosing a high-pressure gas booster pump. We hope that when choosing this type of pump, some issues must be taken into account.


    The selection of high-pressure gas booster pumps is more stringent compared to low-pressure pumps and medium pressure pumps. The following points are provided for everyone to choose from


    1. The inlet pressure of high-pressure gas booster pump has strict requirements. If the inlet pressure is too low, it directly affects the flow rate and output pressure of the gas booster pump.


    2. The high-pressure inlet must be equipped with a filter, remember! A small impurity can make your gas booster pump produce twice the result with half the effort. It is very troublesome to repair and must be taken care of.


    3. Based on the service life of the pump and the duration of continuous operation, whether to consider a backup pump or two parallel pumps controlled by time relays (be sure to communicate with Fuente manufacturer when selecting)


    4. The output pressure of the high-pressure air pump should have a margin compared to the pressure required by oneself.


    5. The on-site usage environment should be free of dust and impurities.


    What aspects should be paid attention to when using a high-pressure gas booster pump?


    1. Operators must undergo corresponding training, familiarize themselves with the working principle, operating procedures, and daily maintenance of gas booster pumps.


    2. After each use of the high-pressure air pump, it is necessary to exhaust the high-pressure gas completely.


    3. Regularly maintain the cleanliness and hygiene of the gas booster pump.


    4. Regularly inspect and maintain the integrity of components.


    5. The driving pressure range is ≤ 8 bar. Do not use overvoltage drive


    Before use, an oil-water separator should be added to the drive port to frequently release the moisture inside the water cup.


    That's all for the usage precautions and selection requirements of high-pressure gas booster pumps. I hope it can provide some help to customers who use Feentor gas booster pumps.







    Legal statement: The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted


    本站使用百度智能门户搭建 管理登录