What are the requirements for the driving pressure of a gas booster pump? What are the parameters of the gas booster pump?

Gas booster pumps are increasingly being used in industrial production by most factories, but it is important to note that there are requirements for the gas source when using them

1、 Air source quality standard: Please choose a clean air source to ensure that the pump can work continuously and stably. Meet the requirements in the table below.

2、 Gas source lubrication: When the gas booster pump leaves the factory, all moving parts have been coated with an appropriate amount of lubricating oil, and generally do not require lubrication. If it is driven by dry compressed gas for a long time, it is recommended to add an appropriate amount of lubricating oil to the oil cup of the binary system for oil mist lubrication.

3、 Gas source pressure: The minimum driving pressure of this pump is 1.5-2 bar, and the maximum design driving pressure is 10 bar. It is recommended to keep the usage period between 6-8 bar. The required operating pressure can be achieved by adjusting the pressure of the pressure regulating valve.

4、 The driving pressure of the gas booster pump must not exceed 10 bar. If it is driven through pipeline gas, there must be reliable pressure reducing valves and safety valves.

5、 Connection pipeline: Select appropriate inlet and outlet connection pipelines based on the output pressure and flow rate of the gas booster pump to ensure that they can withstand the maximum output pressure and flow rate of the pump.

6、 The diameter of the connecting pipeline of the driving port of the gas booster pump should be slightly larger than the nominal size of the connecting thread of the pump's driving port. If the connecting diameter becomes smaller, it will greatly affect the working efficiency of the pump!

7、 All pneumatic booster pumps have been lubricated before leaving the factory, and no special lubrication or maintenance is required during operation. Only apply appropriate lubricating grease when disassembling and repairing.

Attention: If it is necessary to replace seals or important vulnerable parts during maintenance, it is recommended to use products from Taizhou Fuente to ensure the normal operation of your pump.