High flow air pressurization system ZTS-ZTV02

The ZTV02 air booster pump is widely used for boosting compressed air

Do you want to know the purpose of an air booster pump? How to use it well? Please read the following article carefully. The principle of an air booster pump is that low pressure pushes a large area piston, which in turn drives a small piston to compress the pressurized medium to achieve the purpose of boosting. Its simple principle, simple structure, easy maintenance, small size, low noise and other advantages are widely used.

The main function of the air boosting system is local boosting, which solves the problem of insufficient pressure in some gas sources. It is mainly used for energy conservation and emission reduction, as well as high-pressure fluids. At present, the pressure control of large air compressors in China is around 6 bar, and excessive power consumption will be much higher. 6 bar can meet the needs of most equipment, and only some equipment require a gas source higher than 6 bar. At this time, ZTV02 air booster pump can be used. The ZTV02 air booster pump can double the original compressed air pressure again. For example, with ZTV02, the on-site gas source can be pressurized and stabilized at 1MPA with a pressure of 5 bar. However, the booster pump has corresponding flow restrictions, and the flow rate after pressurization varies depending on the initial pressure. The higher the pressure, the greater the flow rate after pressurization. ZTV02 can meet the high-pressure requirements of various devices. Below are the parameters of ZTV02.

ZTV02 parameters:

Boost ratio: 2:1

Drive pressure (bar): 2-8 bar

Flow rate: 1400L/min (under 6bar drive)

Drive port size: G1/2

Gas inlet size: NPT1/2

High pressure outlet size: NPT1/2

Gas storage tank: 40-100L