High stop and low start air boost system

The high stop and low start air boosting system is based on the air boosting system of Taizhou Fuente, equipped with a digital intelligent pressure gauge. This equipment is suitable for use in some factories when the air source is occasionally insufficient, such as; The required pressure for factory equipment is 0.7MPa. When the factory air source occasionally drops to 0.7MPa, this model is used. The upper line pressure is set to 0.71MPa and the lower line pressure is 0.69. This way, when the air source is higher than 0.7, the booster pump will not work, which is equivalent to a high-pressure pipeline. At this time, the air booster pump is not consumed. When the pressure is below 0.69MPa, the air pressure boosting system will promptly increase the pressure to 0.71MPa. Compared to the air boosting system, this device effectively saves energy and reduces emissions, while also increasing the service life of the booster pump.

High stop and low start air boost system parameters:

1. Boosting range: 0-4MPa can be set.

2. Flow range: 360-1800L/min.

3. Online pressure setting range: 0-30MPa. We can choose the appropriate stress stage according to the customer's needs

4. Offline pressure setting range: 0-30MPa.

5. Air source intake pressure: 2-8 bar.

6. Output pressure range: 0-30MPa.

7. Air source requirement: clean compressed air.